The first isolator supplied to a multinational pharmaceutical leader has been developed to accommodate three typologies of mills for maximum flexibility for the R&D and pilot applications.
- Pin Mill 100mm
Speed up to 15’000 RPM
- Spiral jet mill 4” (100mm)
Pressure of the process from 2 up to 12 bar
- Spiral jet mill 2” (50mm)
Pressure of the process from 2 up to 12 bar
Other information:
Category OEB5
Volumetric twin screw feeding unit with motor and gears in the technical area
Inlet/Outlet RTPs
Additional outlet with continuous bag with thermal welding
Balance and printer
Pneumatic platform for easier operator access to the unit
CIP Skid dedicated to liquids supply
Unit drying through air and nitrogen
Gloves in hypalon with safe-change system
Front window
The isolator can be dimensioned according to process needs and batch sizes; laboratory, pilot or production.
The isolator is made in AISI316L
The roughness of the surfaces of the isolator is 0.40micron on product contact parts and 0.80 micron on product non-contact parts.
Gaskets are in EPDM – PTFE –Silicone
The working pressure of the isolator is 125Pa (adjustable)
Filtration is made through HEPA filters class H14, safe-change with push- through method.
